手机印刷银浆
SILVER CONDUCTOR DTS-705-1
CONDUCTIVE PASTE FOR FINE PATTERN 
APPLICATION OF TOUCH SCREEN PANEL
Product Description
DTS-705-1 is a one part, conductive paste designed primarily for the purpose of fine pattern in screen printing. It can be used with semi-automatic, and manual printers, and offers excellent residence time on the screen. The cured film has excellent electrical and mechanical properties with good adhesion to a variety surfaces(ITO coated film). 
Processing Procedures
Application
Before use, take paste out of the refrigerator, leave it in a room in the sealed state for approximately one hour, then use after mixing well.
The material may be applied by screen printing, a 400 or 500mesh screen with a 8-12um organic emulsion backing is recommended. Use a hard silicone squeegee. Screens can be cleaned with organic solvents such as 1st Ethyl carbitol, 2nd  Ethanol or Isopropyl Alcohol.
Dilute solution
Ethyl Carbitol Acetate.(CAS : 112-15-2)
Curing
Minimum cure is 130℃ for 30 minutes. Cure time is only a guide. Optimum conditions will vary depending upon application and will need to be determined experimentally.
Storage
| 
             Items  | 
            
             Value  | 
            
             Remarks  | 
        ||
| 
             Silver content  | 
            
             74±2%  | 
            
             TGA  | 
        ||
| 
             Particle size  | 
            
             D50  | 
            
             1.5~1.7㎛  | 
            
             PSA  | 
        |
| 
             Viscosity(cps)  | 
            
             10rpm  | 
            
             180,000~220,000  | 
            
             Brookfield HBT-DVII , SP#14 @ 25 ± 0.5℃  | 
        |
| 
             TI(5/50)  | 
            
             4.0±1.0   | 
        |||
| 
             Volume resistance1  | 
            
             ≤ 1.5×10-4Ωcm  | 
            
             -  | 
        ||
| 
             Adhesion  | 
            
             Cross cut2  | 
            
             ≥ 4B   | 
            
             ASTM D3359  | 
        |
| 
             Pencil hardness3  | 
            
             2H   | 
            
             -  | 
        ||
| 
             Printability4  | 
            
             Continuous  | 
            
             ≥ 150 times  | 
            
             400mesh,18㎛Emulsion:10㎛  | 
        |
| 
             Line width  | 
            
             68~72㎛  | 
        |||
| 
             Thickness  | 
            
             9~11㎛  | 
        |||
| 
             Printed image  | 
        ||||
| 
             Curve  | 
            
             Straight  | 
        |||
| 
             
  | 
            
             
  | 
        |||
Test Condition
1. Printed samples cured at 130℃ for 30 minutes on glass.
2, 3. Printed samples cured at 130℃ for 30 minutes on ITO coated PET film.
4. The original designed value of the printing mask :   Line width 70㎛, Line pitch 70㎛.
复制本页链接:https://www.88huangye.com/huangyegy/show-39090.html
其它信息推荐:| 激光银浆 | 手机印刷银浆 | 激光银浆 DLS-70 | 激光银浆 | 手机印刷银浆 | 激光银浆DLS-70







